Modular Drainage
Products listed below have been assessed and pre-qualified as meeting Transport for NSW Specification R11 Stormwater Drainage and relevant Australian Standards, and are considered suitable for use on the classified road network.
- Installation design and construction must still be undertaken in accordance with relevant specifications and standards to determine project specific suitability.
Note: Modular drainage should only be used once all other avenues for drainage have been considered (where standard pit and pipe cannot be used) and when on-going maintenance can occur, or when approved by the Principal.
Enquiries related to drainage products can be sent via e-mail:
Product.Assessment@transport.nsw.gov.au
| Product name/ distributor | Identification photo | Description / material | Material(s) / manufacture in accordance with AUS Standards / TfNSW Specifications | Publication date |
|---|---|---|---|---|
ACO KERBDRAIN ACO Pty Ltd | ImageImage controls: | Combined modular kerb and continuous inlet structure for road carriageway and median applications Polymer concrete | AS 3996 Access Covers and Grates R11 Stormwater Drainage EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 4 June 2019 |
ACO TRAFFIKDRAIN & POWERDRAIN ACO Pty Ltd | Image Image controls: | Precast grated trench drain used as a continuous inlet structure for kerb and median drainage applications Channel body manufactured from polymer concrete with ductile iron edge rail and ductile iron grates | AS 3996 Access Covers and Grates R11 Stormwater Drainage EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 4 June 2019 |
HAURATON RECYFIX HICAP F (5000 series) GRAF Australia Pty Ltd | Image Image controls: | Slotted channel D400kN loading Reinforced Polypropylene (PP) with integrated spheroidal Ductile Iron grate | R11 Stormwater Drainage EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 21 March 2023 |
Sabdrain 704200SP Confast | Image Image controls: | Modular grated drainage channel D210 (200mm x 100mm x 1000mm, 200mm x 150mm x 1000mm, 200mm x 200mm x 1000mm, 200mm x 250mm x 1000mm, 200mm x 300mm x 1000mm) Polypropylene plastic channel, ductile cast iron grating, metal edge rails and fixings | AS 3996 Access Covers and Grates R11 Stormwater Drainage EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 19 February 2021 |
SABDrain 704300 Confast | Image Image controls: | Modular grated drainage channel D210 (300mm x 300mm x 500mm) Polypropylene plastic channel, ductile cast iron grating, metal edge rails and fixings | AS 3996 Access Covers and Grates R11 Stormwater Drainage EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 4 June 2019 |
THUNDAFLO SPEL Environmental | Image Image controls: | Heavy duty channel drainage system
Galvanised or stainless steel angle iron and sheet, powered coated ductile iron, fibreglass rods and steel springs | AS 3996 Access Covers and Grates EN 1433 Drainage Channels for Vehicular and Pedestrian areas - Classification, Design and Testing Requirements, Marking and Evaluation of Conformity | 5 July 2019 |