Register of Materials

The Transport for NSW register of materials provides broad details for each submitted material together with information of the supplier.

Materials listed here as 'conforming' indicate that the submitted materials conform to the nominated Transport for NSW specification and may be used on Transport for NSW projects.

Materials listed as 'conforming' or 'conditional' require ongoing production testing in accordance with the relevant specification whenever used in Transport for NSW projects or purchased by Transport for NSW. However listing of your material in the materials mix register as 'conforming' or 'conditional' will alleviate some initial testing requirements.

Definitions

One of the statuses will apply to each material registered as applicable:

  • CONFORMING: The submitted results satisfy the criteria in the specification.
  • PENDING: Material/Mix nomination has been processed but awaiting additional information or confirmation of data from the material supplier.
  • FAILED: Submission failed to meet the requirements in the specification.
  • CONDITIONAL: The project specific material/mix results satisfy most of the criteria in the specification. Conditions and/or limitations for use are listed on the register.
  • EXPIRED: Submission has expired past the valid too date. New submission required.

Material Types

The materials register is made available as a PDF file, together with links to more information and submission forms:

Material Registers

Concrete Submission Information

The concrete register is applicable to the following Transport for NSW specifications:

  • Pavements - R82 (Lean-Mix Concrete Subbase)
  • Pavements - R83 (Concrete Pavement Base)
  • Pavements - R53 (Concrete (for General Use), Mortar and Grout)
  • Pavements - QA3201 (Concrete Supply For Maintenance)
  • Bridges - B80 (Concrete Work for Bridges)

Specifications are available for download from the Transport Standards Portal.

Depending on the specification requirements, Transport for NSW typically requires the following details for the assessment of compliance:

  1. Concrete design overview – specification details, placement, handling, batching etc.
  2. Statement of Compliance from Contractor or Supplier.
  3. Verification Checklist.
  4. Test Certificates for Concrete Mix, Cements & SCMs, Coarse Aggregates, Fine Aggregates, Admixtures and Water.
  5. Essential mix data provided by email.

Submit your mix information in PDF format to the appropriate discipline contact as follows:

Asphalt Submission Information

The asphalt register is applicable to the following Transport for NSW specifications.

  • R116 (Heavy Duty Dense Graded Asphalt)
  • R117 (Light Duty Dense Graded Asphalt)
  • R118 (Crumb Rubber Asphalt)
  • R121 (Stone Mastic Asphalt)

Specifications are available for download from the Transport Standards Portal.

Submit your nominated mix submission to Craig Brady at Craig.Brady@transport.nsw.gov.au or tel: 9794 4715.

The nominated mix submissions must include all requirements listed in clause 2.3 of the relevant asphalt specification:

You can use the following forms to submit your mix submissions:

Please ensure you also send the associated test reports to validate any values entered into the above forms.

Granular Materials Submission Information

The granular materials register is applicable to Transport for NSW specification 3051 Granular Base and Subbase Materials for Surfaced Road Pavements.

Specifications are available for download from the Transport Standards Portal.

Submit your nominated material submission to James Allen at James.ALLEN@transport.nsw.gov.au or tel: 8837 0970.

Sealing Aggregates Submission Information

The sealing aggregates register is applicable to Transport for NSW specification 3151 Cover Aggregate for Sprayed Bituminous Surfacing.

Specifications are available for download from the Transport Standards Portal.

You can use the following forms to submit your mix submissions:

NR106 Sprayed sealing aggregate form Issue 1 (XLS, 306 KB)

Submit your nominated material submission to Sai Yin at Sai.YIN@transport.nsw.gov.au or tel: 8837 0979.

Please ensure you also send the associated test reports to validate any values entered into the above forms.

Contacts

For all enquiries please contact: